PRODUCTS NEWS
You are here: Home » News » PRODUCTS NEWS
2019
DATE
10 - 28
Mold type repair direction
Mold type repair direction1. The raw edge is divided into pl edging, broken burrs, and burrs1.pl The cause of the burr is that the strength of the mold is insufficient. On the basis of the ok method, it is necessary to confirm: The height, quantity and position of the support column2. The stren
Read More
2019
DATE
10 - 23
Mold engineering operation process
1Mold engineering operation process `
Read More
2019
DATE
08 - 27
Precision mold technology and quality
The basic knowledge of the mold is to tell the basic composition of the mold, the influence of the shape on the product, and the introduction of the mold model.
1. The basic composition of the mold
2. The influence of the shape of the mold product on the product
3. Influence of water inlet on shrinkage rate of products
4. The mold wall thickness is too large and the wall thickness is too small
5. Rounded corners (R position)
6. Reinforcement
7. Hole
8. Mold insert, row position, slant top
9.The plastic products made by precision molds have a good performance in terms of precision and quality. The company is committed to provide quality products to customers with the spirit of artisans.
Read More
2019
DATE
08 - 09
Plastic Injection Molding China Manufacturer
Plastic injection molding provides tight tolerances and repeatability and is ideal for high volume production of plastic molded parts. Injection molded plastic parts can be manufactured using a wide range of thermoplastic polymers, resins and elastomers, making it an ideal and cost-effective process
Read More
2019
DATE
08 - 09
Plastic Injection Molding Process
The process cycle for injection molding is very short, typically between 2 seconds and 2 minutes, and consists of the following stages:Clamping - Prior to the injection of the material into the mold, the two halves of the mold must first be securely closed by the clamping unit. Each half of the mol
Read More
2019
DATE
08 - 09
Injection moulding Supplier & Manufacturer
Injection molding is the most commonly used manufacturing process for the fabrication of plastic parts. A wide variety of products are manufactured using injection molding, which vary greatly in their size, complexity, and application. The injection molding process requires the use of an injection m
Read More

plastic injection moulding

Dongguan JiangZhi Electronic Technology Co., Ltd.  offer you a full range of plastic injection moulding services from design to injection moulding production and assembly plastic parts.
 Contact Us
+86 - 0769-81582899

Jerry@jiangzhimy.com
 

QUICK LINK

FEEDBACK
Copyright  Dongguan JiangZhi Electronic Technology Co., Ltd. All rights reserved.   Support By shansunet